首页>PROFIBUS DP Series>Universal Serial/PROFIBUS DP>GT200-DP-RS
  GT200-DP-RS
   
 
GT200-DP-RS
Description:
The gateway GT200-DP-RS can connect serial devices to PROFIBUS DP network.
 
Technical Specification:
 
  1. Acts as the PROFIBUS DP slave on PROFIBUS DP.
2. RS232/422/485 Selection via software.
3. Supports Modbus RTU/ASCII Master mode, Modbus RTU/ASCII Slave mode, and Generic Data mode.
4. Serial: RS485, RS232, RS422, half-duplex.
5. Serial Baud rate: 300, 600, 1200, 2400, 9600, 19.2 K, 38.4K, 57.6K and 115.2Kbps can be selected.
6. As a PROFIBUS DP slave. Automatic baud rate detection on PROFIBUS DP(9600bit/s~12Mbit/s).
7. Complete PROFIBUS DP V0 slave functionality according to EN50170 (IEC61158).
8. Max Input: 244 bytes;Max Output: 244 bytes;Max Input+Output: 488 Byte.
9. Power Supply: 11V-30VDC, Maximum Power Dissipation: 2W.
10. Operating Temp.:-40°F to 158°F (-40 ºC to 70 ºC), Rel. Humidity: 5%-95% RH non-condensing.
11. Dimension(W*H*D):1.6in*4.9in*4.5in(40mm*125mm*110mm).
12. Mounting: DIN Rail Mounting(35mm).
13. Protection Level: IP20.